Sand making machine widely use for sand making with good shape--part of Huahong

Description of sand making machine:

This sand maker machine also known as sand making machine, It has more advantages than any other crusher in processing the extremely hard materials. Such as: granite, basalt, limestone, quartz stone, gneiss, cement clinker, concrete aggregate, ceramic raw material, iron ore, gold, copper, corundum, bauxite, silicon, etc.

Operating Principleof sand making machine:
New vertical shaft impact crusher adopts advanced selective and cleavage crushing principles, exerts enough kinetic energy on material directly, and can change the kinetic energy into crushing energy through impact. Material crack along the natural textures face and cleavage face, therefore, it feature of good shape and low self-consumption. This equipment can achieve the transformation between "stone hits stone" working principle and stone hits iron working principle.
The material fall into feeding hopper, enter into high-speed swing wheels through centered feeding hole and are accelerated rapidly inside the swing wheels. Its acceleration can reach tenfold of gravitational acceleration. Then ejected from swing wheel in high speed, the material firstly impact the other part of materials which are freely falling after rebounding, then impact the stone under layers(stone hits stone) or impact plate(stone hits iron) together, and afterwards impact upward after rebounding to the top of eddy chamber, which will change its motion direction. The material will move downwards, impact material ejected from vane wheel runner and form a continuous material screen. In this way, a piece of stone material is impacted, rubbed and grinded repeatedly inside the eddy chamber. Finally, crushed material will be discharged from bottom of equipment.
Central feeding accompanies with circular feeding: the materials fall into feeding hopper, drop from circular hole, divided into two parts of materials by separating plate, one part of which enter into high-speeding swing wheel through separating plate, and the other part fall down from separating plate. The materials entered into swing wheel are accelerated rapidly inside the swing wheel. Its acceleration can reach tenfold of gravitational acceleration. Then ejected from swing wheel in high speed, the material firstly impact the other part of materials which are freely falling after dropping from the separating plate, then impact the eddy under layers together inside the eddy chamber, and afterwards impact upward after rebounding to the top of eddy chamber, which will change its motion direction. The material will move downwards, impact materials ejected from vane wheel runner and form a continuous material screen. In this way, a piece of stone material is impacted, rubbed and grinded repeatedly inside the eddy chamber. Finally, crushed materials will be discharge from the bottom of equipment.

Detailed Sand Making Equipment features:
1.Great reduction ratio and high crushing efficiency
2.High grade cubic shaped finished product
3.Able to crush extremely hard materials
4.Environmental protection with lower noise and dust pollution
5.Lower power consumption and easy maintenance
6.Dilute oil lubrication system